01 SSI Company Profile
1.About SSI
SSI（Stamford Scientific International,Inc）is one of the world's top American manufacturers specialising in the development and production of high quality aeration equipment for the wastewater treatment industry, established in 1995 in Poughkeepsie, New York, with 3 manufacturing facilities worldwide, in the USA, Korea and the Netherlands.For over 20 years SSI has focused on rapidly advancing secondary biological wastewater treatment through research and development. The results include patents on advanced fine bubble diffuser membrane materials, innovative product manufacturing techniques, and innovative and simple interlocking components.
2.Leading-Edge Product
SSI aerator whole disc in foreign raw imports. Material using high-quality EPDM rubber (EPDM), even if there are far higher than the number of other brands of membrane holes, the entire life of the diaphragm is far more than similar products. SSI's membrane life basically reaches more than 6-8 years.
3.Reliable R&D
SSI invests heavily in research and development each year. SSI has developed EPDM and FEPDM aeration coils with Teflon coating on the diaphragm in addition to the original aeration discs and aeration tubes, which have an even longer product life of more than 10 years, providing additional benefits to all wastewater treatment plants. SSI's vision is to be the premier supplier of diffusion aeration systems, process integration, effluent treatment plants (ETPs) and sewage treatment plants (STPs) worldwide.
Through all of our businesses, we project our shared values. At SSI, we are proud to do our part in providing superior fine bubble diffusers and MBBRs to help clean water around the world.
SSI Aeration Product Categories：
02Membrane Performance
1.Introduction of membrane
EPDM is a synthetic rubber product developed according to the customer's usage requirements. Due to its unique compound composition and compression moulding process, the membrane retains its physical properties for long periods of time under minimal water pressure, resists tearing, and retains its shape after years of cyclic operation, producing fine air bubbles. Our EPDM membrane products have been tried and tested in a variety of municipal and industrial wastewater treatment applications with excellent results. However, standard EPDM is not recommended for applications where solvents, grease, or oils are
present, as well as high concentrations of metal salts. Manufactured using a compression moulding process with uniform specific gravity and thickness. Resistant to pulling in various directions and to changes in the properties of the membrane material. High coefficient of elasticity, proper taper can reduce unit pressure, low pressure loss, high dissolved oxygen efficiency, long service life.The centre area of the diaphragm is non-porous and the diaphragm will fall back to the base and seal when the aeration system is shut down. The entire diaphragm surface allows good air passage. Membrane resists clogging and is at least 70% hydrophilic. Tear elongation of up to 700% is suitable for processes with cyclic opening and closing operations and retains its shape over long periods of time, producing fine air bubbles. The diaphragm material is high quality EPDM rubber with less than 12% oil content. The characteristics are as follows (attached table):
Schedule: EPDM diaphragm performance parameters
2. Introduction to the performance of EPDM membrane coated with PTFE and VITON.
PTFE (polytetrafluoroethylene) E and VITON are synthetic rubbers commonly known as fluoroelastomers. They have a wide range of resistance to a variety of chemicals, solvents, oils, greases, etc. that can cause damage to conventional rubber, and are therefore recognised as a material with excellent performance. However, the disadvantage is that they are expensive. So SSI developed the application of fluoroelastomer coatings, a patented method of permanently bonding to EPDM surfaces or other substrates, which has proven to be a proven method. SSI's new technology allows the diaphragm to not only maintain the excellent physical properties of traditional rubber materials, but also to provide the chemical, solvent, and grease resistance of the world's highest-grade rubber materials, at a cost you can afford. You can afford it. SSI's new fluoroelastomer-coated EPDM diaphragms have been proven to be free of scaling and any change in material properties in many wastewater treatment plants that have experienced diaphragm damage due to calcium build-up and solvent corrosion.
Table: PTFE membrane performance parameters
3.Material comparison
4. About the performance advantages of PTFE
Developed in 2004 by SSI Patents, PTFE coated EPDM membranes are proven technology. Since the introduction of PTFE membranes, SSI's patented technology has made tremendous strides in reliability, cost and efficiency, and aeration system monitoring, allowing you to keep your plant running at peak operating conditions 24/7, 365 days a year. SSI's patented PTFE membranes are more durable than ordinary EPDM membranes and are becoming the industry standard worldwide.SSI's PTFE membranes are used in a wide range of municipal and industrial applications including dairies, pulp and paper, beverage and refineries. Since 2004, SSI's PTFE membranes have been proven to provide improved scale protection, resulting in fewer cleanings in most cases 5 to 10 times better performance than standard EPDM membranes made by the industry's leading manufacturers.
PTFE has replaced silicone and polyurethane membranes.
5. PTFE properties
Resistance to biofouling and chemical precipitation
Creep resistance
Resistance to plasticiser loss
Traditional EPDM membranes have a short life in pulp and paper mills due to fouling, creep (stretching) and plasticiser loss (shrinkage). SSI's PTFE membranes can help your mill run longer, reduce downtime and improve oxygen transfer efficiency. PTFE membranes are a small investment that can keep your mill running for years before the next membrane replacement or blower failure. In independent studies, SSI's PTFE membranes have shown less plasticiser migration and slower creep than other materials. Maintenance of the plasticiser in SSI's PTFE membranes allows the membranes to maintain their initial properties, helping to preserve the performance and efficiency of your aeration system.
SSI's patented PTFE membrane is more durable than ordinary EPDM membranes and is becoming the global industry standard.
6.PTFE test report
SSI PTFE and PEEK coated diffusion films do not contain PFAS or PFOA.
When SSI worked with suppliers to develop coatings in the 2000s, SSI insisted on coating packages that didnot contain heavy metals or by-products that could theoretically be used in potable water service, even if our products were used in wastewater.
04 Installation Instructions
1.Saddle connection
GR4/6 saddle connection
Threaded saddle connection
Your message must be between 20-3,000 characters!
