Place of Origin:
CHINA
Brand Name:
DUBHE
Certification:
ISO
Model Number:
DUDH-1000
Contact Us
Tube Diffuser With EPDM Membrane Sewage Treatment(saddle connection)
The Tube Diffuser with EPDM Membrane Sewage Treatment is a highly efficient aeration system designed for use in wastewater treatment plants. This model features a saddle connection and uses a flexible EPDM membrane to diffuse air into fine bubbles, increasing the surface area of the air-water interface and facilitating oxygen transfer.
This diffuser is made of materials that are resistant to wear and corrosion, ensuring that it can withstand the harsh conditions of wastewater treatment environments and maintain its performance over time. The EPDM membrane used in the diffuser is highly resistant to fouling, reducing the need for cleaning and maintenance.
The tubular microporous aerator adopts a tubular structure, and the membrane tension is greatly reduced compared to the disc aerator.
The rubber film of the tubular aerator adopts natural rubber adhesive and aging formula to extend the service life of the film
Uniform opening with a large number of holes, with each group having 6624 holes × 2 (ordinary disc type microporous aerator Φ 215 for 2000 holes).
Adopting stainless steel connecting fasteners, the interface is not prone to air leakage and is easy to disassemble.
The tubular microporous aerator has a high oxygen utilization rate, uniform gas distribution, no blockage, long service life, no water accumulation in the trachea, and stable and reliable performance.
Simple installation structure, non-buoyancy aeration pipe, and convenient design and use.
Low Maintenance Requirements:
The device is designed to be durable and long-lasting, with low maintenance requirements.
Corrosion Resistance:
The aerator is made of materials that are resistant to wear and corrosion, ensuring that the device can withstand the harsh conditions of wastewater treatment environments and maintain its performance over time.
Membrane Diffuser Technology:
The EPDM membrane sewage treatment tubular aerator uses membrane diffuser technology, which involves a flexible EPDM membrane that diffuses the air into fine bubbles. This technology helps to increase the surface area of the air-water interface, facilitating oxygen transfer and improving the efficiency of the aeration process.
Fine bubble tube diffuser is a water treatment oxygen-filling device. Its working principle is that oxygen is transported by a blower through a pipeline and enters the microporous aerator through a pipeline. Then, microporous bubbles are blown out through the microporous membrane on the aerator, fully diffusing and mixing into the mixed liquid, allowing the oxygen in the bubbles to dissolve into the mixed liquid, providing dissolved oxygen required for microbial biochemical reactions, and ensuring sufficient mixing of sewage, Keep the activated sludge in a suspended state. By fully contacting the three phases of mud, water, and gas, it is ensured that activated sludge fully utilizes the dissolved oxygen in the water to decompose organic pollutants.
Complete product line-----creating the system that fits your needs
DUBHE manufactures disc diffusers and tube diffusers, and we mount these products on a wide range of piping materials including PVC, CPVC, PP, and Stainless Steel.
We have the ability to attach diffusers to pipes using saddles, grommets, or pre-assembled PODS.
We can provide retrievable systems or fixed grids, and systems in dit form or mostly factory assembled.
Piping system integrity icker wall pipe and double anchors for fewer breakages.
Our piping has double rod support that stands as standard two anchors for each support location means twice the resistance to hydraulic and thermal loads. Most often supports fail due to temperature and water velocity.SSllocates two anchors where support is needed most, helping to increase product longevity.
Comprehensive design service and after-sales support
DUBHE provides full design services, including biological and mixing calculations, process simulations, and hydraulic studies. We maintain a full drafting department with 3D and animation capabilities and we can assist with specifications and CAD drawings. Our service and installation crew can hold your hand during the early stages of the project and our worldwide multilingual staff is dedicated to your complete satisfaction.
Q: What's the delivery time?
A: About 30 days.
Q: What's the MOQ?
A: Greater than 1 (not free shipping)
Q: Do you have an inspection report for the material?
A: Yes, we have.
Q: Can you accept mixed batches of different products?
A: Yes, we can.
Send your inquiry directly to us