Place of Origin:
CHINA
Brand Name:
DUBHE
Certification:
ISO
Model Number:
DEM150-120
Contact Us
High Efficiency MBR Wastewater Treatment with CPVC Membrane DEM150-120
MEMBRANE BIO-REACTOR is a new type of water treatment technology and process combining membrane separation unit and biological treatment unit.
This technology can not only maintain a high concentration of microorganisms in the biological reactor, improve the volumetric load of the treatment device and save floor space, but also can efficiently separate solids and liquids, replacing the traditional technology of sedimentation and filtration, and the system effluent is of good quality and can be directly reused as non-drinking municipal water.
DEM series membrane module is one of the main products of flat-plate ultra- and microfiltration membrane, which is the core product of MBR.
Preferred imported chlorinated polyvinyl chloride (CPVC) as the core membrane material, the use of internationally advanced NIPS (non-solvent-initiated phase separation) and surface evaporation technology, to obtain ultra-thin skin structure of the separation layer, the formation of the surface filtration process, to obtain a high flux, excellent recovery, cleaning performance. DEM R & D CPVC flat sheet membranes are the first choice of membrane products for wastewater treatment.
Higher Heat-resistance Ozone-depleted Antimicrobial Preservative
1. Space saving: Compared with the traditional model, it only occupies one-third of the original area.
2. Low energy consumption: lower wind pressure can be used for oxygenation, compared with other traditional treatment processes, the power consumption is greatly reduced.
3. Low maintenance cost: the automatic control can be started with one button to realize unattended operation, and remote monitoring can be realized through the mobile phone APP.
4. Long service life: no human daily maintenance is required, and the service life is more than 10 years.
1. Water Treatment: Membrane processes like RO and UF are used for desalination, wastewater treatment, and purification of drinking water.
2. Food and Beverage: Membrane filtration is employed for the concentration, clarification, and sterilization of juices, dairy products, wine, and beer.
3. Pharmaceuticals: Membrane technology is used for the separation and purification of pharmaceutical compounds, drug delivery systems, and sterile filtration.
4. Chemical Processing: Membrane processes are utilized for solvent recovery, separation of organic compounds, and purification of chemicals.
5. Biotechnology: Membrane filtration is employed in bioreactors, protein separation, and cell harvesting.
DEM series flat MBR membrane modules are composed of membrane element box and aeration box, in which the membrane element box is composed of membrane element, water-producing silicone hose, ABS water collection pipe, chute (fixed membrane element) and stainless steel bracket.
The aeration box is composed of UPVC main pipe, ABS aeration branch pipe, pipe flange and stainless steel bracket.
Attention:
1. The membrane module is set in the membrane tank, and the treated water filtered by the membrane element is discharged through the hose and collecting pipe.
2. In order to prevent the pollution of the membrane element, the lower part of the membrane module is equipped with a perforated aeration pipe, which produces an aeration flow that can provide oxygen for the biological reaction of the aerobic tank and clean the surface of the membrane element at the same time.
3. SUS304 stainless steel is generally used as the material of membrane module support, if used for sewage containing high concentrations of chloride ions or other salts, please specify when ordering, so that the membrane module support can be made of the material suitable for it.
Sewage flows through the mechanical grating (grating gap less than 1mm) to capture large particles of suspended solids and impurities and then flows into the sewage regulating tank for water quality and water quantity adjustment, and then lifted by the lifting pump to the MBR biological reaction system. The whole biochemical treatment system consists of a pre-treatment tank and MBR reaction tank, according to the incoming water quality and effluent requirements, to determine whether the need for the pre-treatment tank. The pretreatment tank can adopt hydrolysis acidification, an anaerobic or aerobic process, or an anoxic denitrification tank. MBR reaction tank is equipped with a submerged flat membrane module, constituting MBR- aerobic operation mode.
MBR reaction pool effluent directly into the reuse pool, adding disinfectant or ultraviolet light disinfection, the effluent discharge or pumped into the water pipeline network through the reuse, but also for nanofiltration or reverse osmosis system for further treatment and reuse.
Q1: Can you print our logo on the outer package?
A: Yes, you can.
Q2: Can we visit your company and factory?
A: Sure, if you can visit the factory, we will have relevant personnel to explain the products to you.
Q3: Can you accept mixed batches of different products?
A: We can accept the mixing of different equipment.
Q4: Do you have an inspection report for the material?
A: We can provide you with the relative certificates.
Send your inquiry directly to us